Resins and Accessories
TrisKem International is a leading provider of extraction chromatographic resins and solutions for the separation of radioactive and stable elements.
TrisKem's main products line consists of a wide selection of different extraction chromatographic resins which allow the separation of ions from various samples and matrices (irradiated targets, environmental, medical and bioassay as well as waste and decommissioning samples).
Our products are standard technology in radiochemistry and they are used by international accredited laboratories and monitoring agencies such as the IAEA, AREVA, IRSN, CEA, BfS…) and radionuclide producers worldwide. You will find more information in the enclosed technical documentation and the product sheets of the respective products.
-
CU RESIN
-
Applications :
- Separation of copper
-
Properties :
- Density : 0.38 g/ml
- Capacity : 3 mg Cu/g CU resin
-
-
DGA RESIN
-
Applications :
- Separation of Americium
- Separation of Actinium
-
Properties :
- Density : 0,38g/ml
- Capacity : 12 mg Eu/ml resin DN (DGA, normal)
- 15 mg Eu/ml resin DB (DGA, branched)
- Conversion factor Dw/k' : 1,75
-
-
DGA SHEETS
-
Applications :
- Quality control of radionuclides for radiopharmaceutical applications (e.g. Ra-223, Ga-68,…)
-
-
DIPHONIX/DIPHOSIL RESINS
-
Applications :
- Preconcentration of actinides
- Removal of Fe(III) from Cu electrowinning solutions
- Manganese removal from potable water
- Uranium removal from aqueous radioactive waste
-
Properties :
- Iron capacity (hydrated resin) Diphonix: ≥ 10g Fe/L resin
- Dry weight acid capacity Diphonix: ≥ 5,3 mEq/g resin
- Diphosil ≥ 1,0 mEq/g resin
- Moisture content Diphonix: 60 – 70%
- Wet Density Diphonix: 1,16 g/mL
- Diphosil 1,50 g/mL
- Bed density (dry resin) Diphonix: 0,30 g dry resin / mL chrom. bed
- Diphosil 0,39 g dry resin / mL chrom. Bed
-
-
LN/LN2/LN3 RESINS
-
Applications :
- Separation of Lanthanides
- Separation of Actinium
-
Properties :
- Density: LN resin: 0.38g/ml; LN2 resin: 0.37g/ml; LN3 resin: 0.39g/ml
- Capacity: LN and LN2 Resin: 0.16 mmol/ml resin (trivalent actinides and lanthanides)
- LN3 Resin: 0.18 mmol/ml resin (trivalent actinides and lanthanides)
- Conversion factor Dw/k' : LN resin: 1.75; LN2 resin: 1.82; LN3 resin: 1.67
-
-
-
MONOPHOS RESIN
-
Applications :
- Removal of Fe(III) from Cu electrowinning solutions
-
Properties :
- Iron capacity (hydrated resin) Monophos: ≥ 18g Fe/L resin
- Dry weight acid capacity Monophos: ≥ 8,0 mEq/g resin
- Moisture content Monophos: 55 – 70%
-
-
NI RESIN
-
Applications :
- Separation of nickel
-
Properties :
- Density : 0,25 g/ml
- Capacity : 4 mg Ni/g resin NI
-
